Accredited courses
If you're looking to train in a new area, bolster your existing qualifications, or even start a career in something completely new, our Nationally accredited courses will take you places.
RIIWHS204E - Work Safely at Heights
Cost: $256
Duration: 1 day
Book Now
Course Overview
The Work Safely at Heights training course is designed for those who are required to carry out work at heights. These tasks can be a high-risk activity and must be taken seriously and no person is to conduct any work activity without proper training in the equipment and personal protective equipment they are to use. This course covers all of the areas required to ensure your safety in the workplace.
Objectives
The aim of this course is to provide participants with good knowledge of the following key points and the ability to apply this knowledge with wisdom in a practical way:
- Legislation requirements
- Identification of work requirements, work procedures and instructions
- Definition of working at heights
- Risk assessment and Hierarchy of Control
- Environment
- Access and installation of equipment
- Dropped objects
- Edge management
- Scaffolding
- Fall injury prevention systems
- Rescue plan
- Suspension tolerance
- Perform work at heights
- Clear and clean up work area
Pre-requisites
There are no specified pre-requisite units required however, it is strongly recommended that all participants are able to meet the Entry Requirements before attempting this course.
Entry Requirements
- Sufficient level of language, literacy and numeracy skills to perform the assessment and complete calculations
- Presentation of participant’s own Unique Student Identifier (USI) number
- No vertigo or fear of heights
- Physical flexibility
- Ability to wear a safety harness rated to 160 kg
- Age 18 years or over
Location
Monadelphous Development Centre
15 Cocos Drive
Bibra Lake, WA 6163
Duration
1 day (8 hours) consisting of:
- Classroom training
- Practical skills training
- Assessment – theory and practical
Mode of Delivery
Face-to-face
Course Resources
- All learning resources, materials and practical activity equipment provided by Monadelphous
- Full PPE to be worn by participant
Fee Information
Course Fee: $256
Payment Due: Full payment due prior to commencement
Payment Method: We accept MasterCard and Visa Card on our EFTPOS card machine. Cash payments are not accepted.
Certification
On successful completion of this course, participants are presented with a:
- Nationally Recognised Statement of Attainment for RIIWHS204D Work safely at heights
- Wallet card for RIIWHS204D Work safely at heights
RIIWHS204E - Work Safely at Heights: Existing Competency Certificate
Cost: $256
Duration: 1 day
Book Now
Course Overview
The Work Safely at Heights training course is designed for those who are required to carry out work at heights. These tasks can be a high-risk activity and must be taken seriously and no person is to conduct any work activity without proper training in the equipment and personal protective equipment they are to use. This course covers all of the areas required to ensure your safety in the workplace.
Objectives
The aim of this course is to provide participants with good knowledge of the following key points and the ability to apply this knowledge with wisdom in a practical way:
- Legislation requirements
- Identification of work requirements, work procedures and instructions
- Definition of working at heights
- Risk assessment and Hierarchy of Control
- Environment
- Access and installation of equipment
- Dropped objects
- Edge management
- Scaffolding
- Fall injury prevention systems
- Rescue plan
- Suspension tolerance
- Perform work at heights
- Clear and clean up work area
Pre-requisites
There are no specified pre-requisite units required however, it is strongly recommended that all participants are able to meet the Entry Requirements before attempting this course.
Entry Requirements
- Sufficient level of language, literacy and numeracy skills to perform the assessment and complete calculations
- Presentation of participant’s own Unique Student Identifier (USI) number
- No vertigo or fear of heights
- Physical flexibility
- Ability to wear a safety harness rated to 160 kg
- Age 18 years or over
Location
Monadelphous Development Centre
15 Cocos Drive
Bibra Lake, WA 6163
Duration
1 day (8 hours) consisting of:
- Classroom training
- Practical skills training
- Assessment – theory and practical
Mode of Delivery
Face-to-face
Course Resources
- All learning resources, materials and practical activity equipment provided by Monadelphous
- Full PPE to be worn by participant
Fee Information
Course Fee: $256
Payment Due: Full payment due prior to commencement
Payment Method: We accept MasterCard and Visa Card on our EFTPOS card machine. Cash payments are not accepted.
Certification
On successful completion of this course, participants are presented with a:
- Nationally Recognised Statement of Attainment for RIIWHS204D Work safely at heights
- Wallet card for RIIWHS204D Work safely at heights
Confine Small Emergencies in a Facility (CSEF) – PUAFER008
Cost: $152
Duration: 3 hours
Book Now
Course Overview
The Confine Small Emergencies in a Facility training, also known as Basic Fire training, is aimed at those who wish to gain practical experience in the use of portable fire extinguishers, fire hose reels and fire blankets.
Objectives
The aim of this course is to provide participants with good knowledge of the following key points and the ability to apply this knowledge with wisdom in a practical way:
- Decision-making skills to select correct initial response firefighting equipment for different types of fires
- Apply recommended manufacturer’s techniques for operating equipment
- Use firefighting equipment
- Correct use of fire extinguishers on different classes of fire
- Knowledge of implications of using incorrect extinguisher on incorrect class of fire
- Understanding how fire can spread by conduction, convection, radiation and direct burning
- Theory of fire, including the tetrahedron of combustion
Pre-requisites
There are no specified pre-requisite units required however, it is strongly recommended that all participants are able to meet the Entry Requirements before attempting this course.
Entry Requirements
- Sufficient level of language and literacy skills to perform the assessment
- Presentation of participant’s own Unique Student Identifier (USI) number
- Flexibility to manoeuvre around burning object
- Age 18 years or over
Location
Monadelphous Development Centre
15 Cocos Drive
Bibra Lake, WA 6163
Duration
Three (3) hours consisting of:
- Classroom training
- Practical skills training
- Assessment – theory and practical
Mode of Delivery
Face-to-face
Course Resources
- All learning resources, materials and practical activity equipment provided by Monadelphous
- Full PPE to be worn by participant
Fee Information
Course Fee: $152
Payment Due: Full payment due prior to commencement
Payment Method: We accept MasterCard and Visa Card on our EFTPOS card machine. Cash payments are not accepted.
Certification
On successful completion of this course, participants are presented with a:
- Nationally Recognised Statement of Attainment for PUAFER008 Confine small workplace emergencies in a Facility (CSEF)
- Wallet card for PUAFER008 Confine small workplace emergencies in a Facility (CSEF)
Conduct Telescopic Materials Handler Operations (TH) – RIIHAN309F
Cost: $420
Duration: 2 days
Book Now
Course Overview
The Conduct Telescopic Materials Handler Operations training is designed to provide participants with the skills to operate a Telehandler and its attachments in a range of heavy lifting machine operator jobs. This course is appropriate for participants required to use a non-slewing telescopic materials handler with a lifting capacity of less than 3 tonnes.
Objectives
The aim of this course is to provide participants with good knowledge of the following key points and the ability to apply this knowledge with wisdom in a practical way:
- Planning and preparing for operations
- Conducting pre-operational checks
- Operating the Telehandler
- Attaching, securing, lifting, carrying and placing materials and loads
- Selecting, fitting and removing attachments
- Relocating the Telehandler from one site to another
- Machine maintenance and cleaning
- Parking and securing the Telehandler
Pre-requisites
There are no specified pre-requisite units required however, it is strongly recommended that all participants are able to meet the Entry Requirements before attempting this course.
Entry Requirements
- Sufficient level of language, literacy and numeracy skills to perform the assessment and complete calculations
- Presentation of participant’s own Unique Student Identifier (USI) number
- Age 18 years or over
Location
Monadelphous Development Centre
15 Cocos Drive
Bibra Lake, WA 6163
Duration
2 days (16) hours consisting of:
- Classroom training
- Practical skills training
- Assessment – theory and practical
Mode of Delivery
Face-to-face
Course Resources
- All learning resources, materials and practical activity equipment provided by Monadelphous
- Full PPE to be worn by participant
Fee Information
Course Fee: $420
Payment Due: Full payment due prior to commencement
Payment Method: We accept MasterCard and Visa Card on our EFTPOS card machine. Cash payments are not accepted.
Certification
On successful completion of this course, participants are presented with a:
- Nationally Recognised Statement of Attainment for RIIHAN309F Conduct telescopic materials handler operations
- Wallet card for RIIHAN309F Conduct telescopic materials handler operations
Gas Test Atmospheres - MSMWHS217
Cost: $190
Duration: 1 day
Book Now
Course Overview
The Gas Test Atmospheres training is a current Nationally Registered unit of competence designed for those who are required to conduct atmospheric testing of potentially hazardous atmospheres within a workplace. The areas that may need to be tested might include: confined spaces, hazardous materials storage areas or restricted spaces. This course covers all of the information required to ensure your safety in the workplace.
Objectives
The aim of this course is to provide participants with good knowledge of the following key points and the ability to apply this knowledge with wisdom in a practical way:
- Legislation framework for gas detection
- Accumulation of gases
- Oxygen enrichment
- Flammable gases
- Types of gas detectors
- Gas monitoring
- Calibration and bump testing
- Explosive range
- Detection / measurement equipment – flammability
- Interpreting flammability (LEL) readings
- Occupational exposure standards and effects of exposure
- Equipment maintenance
Pre-requisites
There are no specified pre-requisite units required however, it is strongly recommended that all participants are able to meet the Entry Requirements before attempting this course.
Entry Requirements
- Sufficient level of language, literacy and numeracy skills to perform the assessment and complete calculations
- Presentation of participant’s own Unique Student Identifier (USI) number
- Age 18 years or over
Location
Monadelphous Development Centre
15 Cocos Drive
Bibra Lake, WA 6163
Duration
One day consisting of six (6) hours:
- Classroom training
- Practical skills training
- Assessment – theory and practical
Mode of Delivery
Face-to-face
Course Resources
- All learning resources, materials and practical activity equipment provided by Monadelphous
- Full PPE to be worn by participant
Fee Information
Course Fee: $190
Payment Due: Full payment due prior to commencement
Payment Method: We accept MasterCard and Visa Card on our EFTPOS card machine. Cash payments are not accepted.
Certification
On successful completion of this course, participants are presented with a:
- Nationally Recognised Statement of Attainment for MSMWHS217 Gas Test Atmospheres
- Wallet card for MSMWHS217 Gas Test Atmospheres
Enter and Work in Confined Spaces (CSE) - RIIWHS202D
Cost: $196
Duration: 1 day
Book Now
Course Overview
The Enter and Work in Confined Spaces course is aimed at those working in operational roles undertaking work in confined spaces.
Objectives
The aim is for participants to have good knowledge of the following key points and the ability to apply this knowledge with wisdom in a practical way to eliminate or minimize hazards in a safe manner for confined space entries.
- Legislation requirements
- Definition of a Confined Space
- Risk Assessment and identifying hazards
- Controlling the risks
- Atmospheres
- Emergency procedures
- Plan and prepare for working a confined space
- Enter and work safely in a confined space
- Exit the confined space
- Clean and pack up work area
Pre-requisites
There are no specified pre-requisite units required however, it is strongly recommended that all participants are able to meet the Entry Requirements before attempting this course.
Entry Requirements
- Sufficient level of language, literacy and numeracy skills to perform the assessment and complete calculations
- Presentation of participant’s own Unique Student Identifier (USI) number
- No claustrophobia
- Flexible and able to crawl through restricted space
- Ability to wear a safety harness rated to 160 kg
- Age 18 years or over
Location
Monadelphous Development Centre
15 Cocos Drive
Bibra Lake, WA 6163
Duration
1 day (8 hours) consisting of:
- Classroom training
- Practical skills training
- Assessment – theory and practical
Mode of Delivery
Face-to-face
Course Resources
- All learning resources, materials and practical activity equipment provided by Monadelphous
- Full PPE to be worn by participant
Fee Information
Course Fee: $256
Payment Due: Full payment due prior to commencement
Payment Method: We accept MasterCard and Visa Card on our EFTPOS card machine. Cash payments are not accepted.
Certification
On successful completion of this course, participants are presented with a:
- Nationally Recognised Statement of Attainment for RIIWHS202D Enter and work in confined spaces
- Wallet card for RIIWHS202D Enter and work in confined spaces
Gas Test Atmospheres - MSMWHS217
Cost: $190
Duration: 1 day
Book Now
Course Overview
The Gas Test Atmospheres training is a current Nationally Registered unit of competence designed for those who are required to conduct atmospheric testing of potentially hazardous atmospheres within a workplace. The areas that may need to be tested might include: confined spaces, hazardous materials storage areas or restricted spaces. This course covers all of the information required to ensure your safety in the workplace.
Objectives
The aim of this course is to provide participants with good knowledge of the following key points and the ability to apply this knowledge with wisdom in a practical way:
- Legislation framework for gas detection
- Accumulation of gases
- Oxygen enrichment
- Flammable gases
- Types of gas detectors
- Gas monitoring
- Calibration and bump testing
- Explosive range
- Detection / measurement equipment – flammability
- Interpreting flammability (LEL) readings
- Occupational exposure standards and effects of exposure
- Equipment maintenance
Pre-requisites
There are no specified pre-requisite units required however, it is strongly recommended that all participants are able to meet the Entry Requirements before attempting this course.
Entry Requirements
- Sufficient level of language, literacy and numeracy skills to perform the assessment and complete calculations
- Presentation of participant’s own Unique Student Identifier (USI) number
- Age 18 years or over
Location
Monadelphous Development Centre
15 Cocos Drive
Bibra Lake, WA 6163
Duration
One day consisting of six (6) hours:
- Classroom training
- Practical skills training
- Assessment – theory and practical
Mode of Delivery
Face-to-face
Course Resources
- All learning resources, materials and practical activity equipment provided by Monadelphous
- Full PPE to be worn by participant
Fee Information
Course Fee: $190
Payment Due: Full payment due prior to commencement
Payment Method: We accept MasterCard and Visa Card on our EFTPOS card machine. Cash payments are not accepted.
Certification
On successful completion of this course, participants are presented with a:
- Nationally Recognised Statement of Attainment for MSMWHS217 Gas Test Atmospheres
- Wallet card for MSMWHS217 Gas Test Atmospheres